Yamaha SMT Feeder
FEEDER is an important part of the SMT production line. Its quality is directly related to the achievement of the production plan and quality goals.
There are some quetions:
1.Unrolled
Mainly due to the slipping of the one-way bearing inside the large reel, personally think that it is a design defect. The three steel balls inside it are easy to wear, and the new one-way bearing is not steel balls but steel columns.
2, Feeder floating height
The alarm will be caused by the deviation of the feeding position, which will seriously damage the suction nozzle, so it is necessary to keep the feeding platform clean.
3.Yamaha SMT Feeder does not feed
If the small spring on Feida falls off or breaks, the gear will become stuck and it will not be able to feed.
4, the feeder is not in place
Material may remain inside the gland, or it may be caused by insufficient gland pressure.
In the production of SMT chip, the SMT chip machine will stop running due to the failure of Yamaha SMT feeder and other accessories, which will cause great losses. Therefore, when performing patch processing, it is necessary to ensure that Feeder supplies normally.
How to choose used smt pick and place machine supplier? Many customers are curious about the ways...
How to choose used FUJI pick and place machine supplier How to choose the right FUJI pick and pl...
SMT nozzle manufacturer for pick and place machine Nozzle Requirements for SMT companies Economi...
Used smt equipment---Juki RS-1 pick and place machine Fast Smart Modular Juki RS-1 pick and place...
Today, I'm going to introduce some famous smt pick and place machine manufacturers. 1. Juki 2. Fu...
