Shenzhen Wenzhan Electronic Technology Co., Ltd.
Contact Us

Contact Person : Wei.feng

Phone Number : +86 18823383970

WhatsApp : +8618823383970

Free call

Price advantage of used SMT machine of various brands

August 16, 2021

Today, I will share some information about the Price advantage of used SMT machine of various brands

We have many brands, such as Samsung pick and place machine , Juki pick and place machine, Panasonic pick and place machine, Fuji pick and place machine, Yamaha pick and place machine, and so on

The used SMT mahcine price is cheap, besides, they are in good condition and work well.

 

 

latest company news about Price advantage of used SMT machine of various brands  0

 

What is a perfect standard pick and place machine?

1. The main performance indicators

1.1 The types, specifications, placement directions, substrate sizes, and placement ranges of components that can be mounted conform to the specifications of the manual.

1.2 SMT speed: The CPH placement rate tested with 1608 chip components is not less than 60% of the nominal IPC9850 speed, or the SPC speed is not greater than twice the nominal speed.

1.3 The flying film rate is not more than 3 ‰.

2. Operating system

2.1 Various indicators, buttons, and operating handles are complete in appearance, and the operation and display are normal.

2.2 The computer system works normally.

2.3 The input and output system works normally

 

latest company news about Price advantage of used SMT machine of various brands  1

 

3. Mechanical part

3.1 All transmission belts, chains and connecting pins are complete, aging and damaged.

3.2 The transmission guide rails and lead screws run smoothly and coordinately, with abnormal noise and oil leakage.

4.Air pressure control section

4.1 The driving cylinder, solenoid valve, piping and connector are clogged with foreign matter and loose and leak. The driving cylinder and solenoid valve work normally, and there is noise.

4.2 The compressed air drying and filtering device is complete and intact.

4.3 The vacuum degree of the head is not less than 500mmHg.

5. Placement accuracy:

That is, the large offset between the center of the component and the center line of the corresponding pad should not exceed 1/3 of the component solder pin width (visual inspection); or the incidence of abnormal offset should not exceed 3 ‰.

We have many used SMT machine on sale, if you are interested in, please contact me.

Get in touch with us

Enter Your Message