yamaha-feeder-daily-inspection-maintenance

Yamaha feeder daily inspection and maintenance

27 Published by Elissa 04 08,2020

Yamaha feeder is used to distribute components from component reels. Basically yamaha feeder has two types, the SS type feeder and the CL type feeder.

CL type feeder is pnumatic feeder, SS type feeder is electric feeder,

yamaha feeder

Purpose: In order to be able to use the yamaha feeder safely for a long time, periodic inspection and maintenance must be carried out.

1.Daily check

 

Before using the tape feeder, please check the following related items.

Whether the fixing rod is loose ?

Whether the material guide is loose Whether the screws are loose?

Are there any deformed or damaged components?

Is there any component missing?

2.Cleaning material guide
In the gap between the tape guide and the plate, if falls into electronic components or other garbage, it will cause the looseness of the tape guide and the deformation of the component transfer port, causing the component failing to to pick. When a similar phenomenon occurs, please follow the steps
step1 Remove the material guide.
Loosen the screws that fix the tape guide shaft above, and remove the tape guide and the guide shaft. Please use a screwdriver to turn the tape guide shaft for easy removal.

Step 2 clean up.
Please use a brush to take the trash between the guide rail and the plate

Step 3 Confirm the operation status of the component transfer port.
Confirm that the component transfer port is operating correctly. If it is caught or sluggish, please replace the new tape guide in time.

Step4 install the material with guide rail.
Install the tape guide and the guide shaft on the plate in the reverse order. Please turn the guide shaft 180 degrees counterclockwise with a flat blade screwdriver
Add resilience. Keep this state and tighten the fixing screw of the material guide shaft. Afterwards, please make sure that there is no gap between the tape guide and the plate.

We have all Yamaha feeder, like Yamaha CL feeder 8/12/16/24/32/44mm...

                                                       Yamaha SS feeder 8/12/16/24/32/44mm...

If you are interested in our Yamaha feeder, please welcome to contact us!

 

How to choose used smt pick and place machine supplier

How to choose used smt pick and place machine supplier? Many customers are curious about the ways...

Do you like ? 109

Read more

How to choose used FUJI pick and place machine supplier

How to choose used FUJI pick and place machine supplier How to choose the right  FUJI pick and pl...

Do you like ? 100

Read more

SMT nozzle manufacturer for pick and place machine

SMT nozzle manufacturer for pick and place machine Nozzle Requirements for SMT companies Economi...

Do you like ? 100

Read more

Used smt euipment Juki RS-1 pick and place machine

Used smt equipment---Juki RS-1 pick and place machine Fast Smart Modular Juki RS-1 pick and place...

Do you like ? 93

Read more

Some famous smt pick and place machine manufacturers

Today, I'm going to introduce some famous smt pick and place machine manufacturers. 1. Juki 2. Fu...

Do you like ? 91

Read more