SMT Samsung feeder maintenance specifications
Standardize the use and maintenance of SAMSUNG feeder in the SMT workshop to ensure the normal operation of the placement equipment
2. Scope of application
Suitable for SMT workshop.
3.1 Normally used components feeder, daily use is maintained by production operators
3.2 The feeder maintenance personnel are responsible for all Feida numbers and regular maintenance
3.3 The feeder maintenance personnel are responsible for the repair and maintenance of the feeder that has failed and reached the maintenance period.
4. Daily management and maintenance of Samsung feeder:
4.1 The patch operator is only allowed to use the feeder within the specified number of the wire body, and it is strictly prohibited to use the feeder of other wire bodies
4.2 The patch operator is responsible for the cleaning of the linear body feeder. After every production shutdown, it is necessary to clean up the scattered materials on the overall exchange trolley and feeder
4.3 The daily inspection is carried out by the user every day according to the equipment mounting and throwing conditions to check whether it meets the requirements of use
4.4 If the feeder fails, the operator shall indicate the failure phenomenon, use the line body, and sign it to the technician.
5. Inspection and maintenance of feeder
5.1 The maintenance time of Feeder is 1 million times, and the machine can record the feeding times of the feeder. When the number of feeding reaches the number, the maintenance technician will maintain and confirm that the condition is in good condition, and then clear the number of feeding.
5.2 The maintenance content is mainly for the function check of the Feeder sensor, screw tightness, gear wear, flatness of the compression tape cover, whether there is any deviation of the sensor plate, whether the outer cover is damaged or not, the tension of the pressure roller and the spring of each part No defects.