Contact Person : Wei.feng
Phone Number : +86 18823383970
WhatsApp : +8618823383970
August 2, 2021
PCB loader, known as board feeding machine and pcb loading machine, is a kind of production equipment used in SMT electronic products production and processing. Its main function is to automatically place unmounted pcb boards in the pcb loader. Board to sucker, and then the sucker automatically puts the PCB on the track of the solder paste printer and uploads it to the solder paste printer for solder paste operation.
Detailed operation process of SMT pcb loader
1. Connect the power supply and air source, and then turn on the power switch;
2. Adjust the width of the guide rail until it is consistent with the width of the PCB to be produced.
Second, the setting of the number of board feeding steps and the boarding point position (need to be in the manual state and the lifting platform is at the lower limit position)
1. Step setting: press key to select Pitch 1/2/3/4;
2. Out-of-board adjustment;
3. Manually adjust the push rod in the middle of the PCB to be produced;
4. Confirm that the machine can smoothly feed the board (the position of the first board exit point);
5. Press the automatic button (switch to automatic);
6. Press the return key (the lifting platform automatically descends to the lower limit point and then rises to the position of the first board exit point);
7. Automatic status.
1. Adjust the anti-static material rack to the same width as the PCB, load it into the PCB board and place it on the loading platform of the upper board machine;
2. Press the auto key in the operation panel of the upper computer;
Fourth, safe operation requirements
1. Please pay attention to whether the working voltage and air pressure are correct when starting up;
2. During automatic operation, unless it is in an emergency, it is recommended not to use the other buttons;
3. It is forbidden for staff to lean on the machine;
4. When lifting the trolley, do not put your hands around the material frame;
5. Pay attention to adjust the distance between the feeding plates of the feeding rack. If the width is wide, it will cause the board to fall, and if it is tight, it will cause the card board;
6. Pay attention to adjust the width of the conveyor belt. If the width is wide, it will easily cause the board to fall, and if it is tight, it will easily cause the board to be stuck.
These are the function and operation process of pcb loader, if you have any questions about it, please don't hesitate to tell me, I will try my best to help you.