HELLER 1936 MK7 Lead Free Hot Air Reflow Soldering
The 1936 MK7 from Heller Industries Inc is a Reflow Soldering Equipment with Heating Zone Length 590 mm, Max Pcb Width 558.8 mm.
main feature
A. Multi-temperature zone design, more temperature control points, to meet the requirements of different temperature curves
B. Effectively eliminate voids, the total void area can be controlled below 1%
C. Efficient production capacity, the average production cycle is 30~60 seconds
D. High-efficiency oil-free vacuum pump unit for shortest depressurization time
E. Efficient flux recovery system to prevent flux residues
The latest MK7 reflow soldering system
1. The latest low roof design
2. The latest low-top cover design is adopted, which is convenient for customers to operate and maintain. The surface temperature of the machine is lower, which is environmentally friendly and energy-saving.
Optimized new heating module
Optimized low-height heating module to achieve the best temperature uniformity; can reduce nitrogen consumption by up to 40%, balance airflow saving Nitrogen. The new heating wire has higher heating efficiency and longer life.
HELLER 1936 MK7 SMT Reflow Oven
Overall machine length: 590 cm (232″)
Number of heating zones: 10
Number of cooling zones: 3 upper cooling zone (standard) / lower cooling zone and external cooling zone (optional)
HELLER 2043 MK7 SMT Reflow Oven
Overall machine length: 678 cm (267″)
Number of heating zones: 13
Number of cooling zones: 3 upper cooling zone (standard) / lower cooling zone and external cooling zone (optional)
HELLER 2049 MK7 SMT Reflow Oven
Overall machine length: 744 cm (292″)
Number of heating zones: 15
Number of cooling zones: 4 upper cooling zone (standard) / lower cooling zone and external cooling zone (optional)
HELLER 2156 MK7 SMT Reflow Oven
Overall machine length: 869 cm (342″)
Number of heating zones: 17
Number of cooling zones: 5 upper cooling zone (standard) / lower cooling zone and external cooling zone (optional)
other machine
wenzhan Techonologies Co.,Ltd
In 2009, Shenzhen wenzhan Technology Co., Ltd. was established to build a more timely and effective communication platform, and realize the company's service tenet of serving leading customers.The engineers of the company are professional technicians who have been certified by the original factory for more than 10 years. They always adhere to the value of putting the interests of customers first, and provide customers with high-quality equipment accessories, consumables, fixtures and technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and reduce the cost of customers at the same time.
reflow solder oven,Soldering reflow solder oven,HELLER 1936 MK7,Reflow Oven
Why Choose Us?
It is precisely because wenzhan technology has the following advantages over the same industry that
more and more customers choose wenzhan as their preferred supplier.
1. Professional pre-sales advice support
2. Excellent after-sales technical service
3. Flexible payment and return policy
4. One stop solution for SMT accessories
5. Stock in the factory with sufficient stock and fast delivery