Send Message
Shenzhen Wenzhan Electronic Technology Co., Ltd.
products
news
Home > news >
Company News About SMT Assembly Line FUJI Pick And Place Machine NXT I M3, NXT I M3S, NXT I M6, NXT I M6S
Events
Contacts
Contacts: Mr. Wei.feng
Fax: 86-18823383970
Contact Now
Mail Us

SMT Assembly Line FUJI Pick And Place Machine NXT I M3, NXT I M3S, NXT I M6, NXT I M6S

2024-10-10
Latest company news about SMT Assembly Line FUJI Pick And Place Machine NXT I M3, NXT I M3S, NXT I M6, NXT I M6S

SMT Assembly Line FUJI Pick And Place Machine NXT I M3, NXT I M3S, NXT I M6, NXT I M6S

FUJI pick and place robot M3 III placement machine, FUJI SMT pick and place machine 12-nozzle head, component capability from 0402 (01005") to 7.5 x 7.5 Height: Up to 3.0 mm.

The NEW NXT III is a highly productive, multi-functional modular placing machine. Built for speed, it features a faster XY robot and tape feeders, as well as a new H24 head that achieves 35,000 chips per hour. The NXT III supports the smallest parts being used in mass production with extreme placing accuracy.

A faster XY robot and faster tape feeders, as well as a newly developed "flying vision" parts camera, mean increased placing ability for all part sizes and types.

The new H24G high-speed head achieves 37,500 cph (chips per hour) (Productivity priority mode) per module, a 44% improvement from the fastest speed of the NXT II.

Item M3 III M6 III
Applicable PCB size (LxW) 48 x 48 mm to 250 x 510 mm (double conveyor)*
48 x 48 mm to 250 x 610 mm (single conveyor)
*Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger than 280 (W) mm must be produced by changing the double conveyor to single lane production mode.
48 x 48 mm to 534 x 510 mm (double conveyor)*
48 x 48 mm to 534 x 610 mm (single conveyor)
*Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger than 280 (W) mm must be produced by changing the double conveyor to single lane production mode.
Part types Up to 20 types of parts (calculated using 8 mm tape) Up to 45 types of parts (calculated using 8 mm tape)
PCB loading time For double conveyor: 0 sec (continuous operation)
For single conveyor: 2.5 sec (transport between M3 III modules), 3.4 sec (transport between M6 III modules)
Placement accuracy
(Fiducial mark standard)
* The placing accuracy is obtained from tests conducted by Fuji.
H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode) (3sigma) cpk≥1.00
V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00
H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00
H08/H04 : +/-0.050 mm (3sigma) cpk≥1.00
H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00
H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00
GL : +/-0.100 mm (3sigma) cpk≥1.00
H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode) (3sigma) cpk≥1.00
V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00
H08M/H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00
H08/H04/OF : +/-0.050 mm (3sigma) cpk≥1.00
H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00
H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00
GL : +/-0.100 mm (3sigma) cpk≥1.00
Productivity
* The throughput above is based on tests conducted at Fuji.
H24G : 37,500 cph (Productivity priority mode) / 35,000 cph (Standard mode)
V12 : 26,000 cph
H12HS : 24,500 cph
H08 : 11,500 cph
H04 : 6,500 cph
H04S : 9,500 cph
H04SF : 10,500 cph
H02 : 5,500 cph
H02F : 6,700 cph
H01 : 4,200 cph
G04 : 7,500 cph
G04F : 7,500 cph
GL : 16,363 dph (0.22 sec/dot)
H24G : 37,500 cph (Productivity priority mode) / 35,000 cph (Standard mode)
V12 : 26,000 cph
H12HS : 24,500 cph
H08M : 13,000 cph
H08 : 11,500 cph
H04 : 6,500 cph
H04S : 9,500 cph
H04SF : 10,500 cph
H02 : 5,500 cph
H02F : 6,700 cph
H01 : 4,200 cph
G04 : 7,500 cph
G04F : 7,500 cph
0F : 3,000 cph
GL : 16,363 dph (0.22 sec/dot)
Supported parts H24G: 0201 to 5 x 5 mmHeight: up to 2.0 mmV12/H12HS: 0402 to 7.5 x 7.5 mmHeight: up to 3.0 mmH08M: 0603 to 45 x 45 mmHeight: up to 13.0 mmH08: 0402 to 12 x 12 mmHeight: up to 6.5 mmH04: 1608 to 38 x 38 mmHeight: up to 9.5 mmH04S/H04SF: 1608 to 38 x 38 mmHeight: up to 6.5 mmH02/H02F/H01/0F: 1608 to 74 x 74 mm (32 x 180 mm)Height: up to 25.4 mmG04/G04F:0402 to 15 x 15 mmHeight: up to 6.5 mm

 

Module width 320 mm 645 mm
Machine dimensions L: 1295 mm (M3 III x 4, M6 III x 2) / 645 mm (M3 III x 2, M6 III)
W: 1900.2 mm, H: 1476 mm
DynaHead(DX)
Nozzle quantity 12 4 1
Throughput(cph) 25,000
Parts presence function ON: 25,000
11000 4700
Part size (mm) 0402 (01005") to 7.5 x 7.5
Height:Up to 3.0 mm
1608 (0603")to 15 x 15
Height:Up to 6.5 mm
1608 (0603")to 74 x 74 (32 x 100)
Height:Up to 25.4 mm
Placing accuracy
(Fiducial mark based referencing)
+/-0.038 (+/-0.050) mm (3σ) cpk≥1.00*
*+/-0.038 mm obtained with rectangular chip placement (high
accuracy tuning) under optimal conditions at Fuji.
+/-0.040 mm (3σ) cpk≥1.00 +/-0.030 mm (3σ) cpk≥1.00
Part presence check o x o
Parts supply Tape o o
  Stick x o
  Tray x o
Parts supply system
lntelligent feeders Support for 4, 8, 12, 16, 24, 32, 44, 56, 72, 88, and 104 mm wide tape
Stick feeders 4 ≤ Part width ≤ 15 mm (6 ≤ Stick width ≤ 18 mm), 15 ≤ Part width ≤ 32 mm (18 ≤ Stick width ≤ 36 mm)
Trays Applicable tray size: 135.9 x 322.6 mm (JEDEC standard) (Tray Unit-M)276 x 330 mm (Tray Unit- LT), 143 x 330 mm (Tray Unit-LTC)
Option
Tray feeders, PCU II (Pallet Change Unit), MCU (Module change unit), Engineering panel stand, FUJI CAMX Adapter, Nexim Software

 

latest company news about SMT Assembly Line FUJI Pick And Place Machine NXT I M3, NXT I M3S, NXT I M6, NXT I M6S  0latest company news about SMT Assembly Line FUJI Pick And Place Machine NXT I M3, NXT I M3S, NXT I M6, NXT I M6S  1latest company news about SMT Assembly Line FUJI Pick And Place Machine NXT I M3, NXT I M3S, NXT I M6, NXT I M6S  2