| Quantity: | |
|---|---|
Yamaha YSM20R Pick and Place Machine 95,000CPH (optimum)
The Machine This Page Describes
What this page sets out is a Yamaha YSM20R placement machine for a PCB assembly line: two board lanes, an X-axis two-beam arrangement, and two head options that do not cover the same component window. The attributes carry the headline numbers — 140 component positions, a 0.45MPa gas supply, an overall size of L 1,374 × W 1,857 × H 1,445 mm, and a wooden box for transport — while the specification table below carries the detail tier by tier. Figures here are reproduced as the page prints them: nothing is rounded up, and nothing is merged across rows. Give us the boards in production and the pace required, and the configuration that fits is confirmed in reply.
Dual Lane And Dual Beam Figures
- Board window, dual stage: single PCB L810*W490 mm down to L50*W50 mm; double PCB L380*W490 mm down to L50*W50 mm.
- Board window, single lane: L810*W490 mm down to L50*W50 mm.
- The mounting-capability row is written for one arrangement only — X-axis 2-beam, with 2 High-Speed Multi (HM) heads — and it is qualified: 95,000 CPH (under optimum conditions as defined by Yamaha Motor).
- That is the only speed figure on the page. It is not repeated here as a machine-wide rate, and no second figure is derived from it.
Head Types And Component Windows
- High-Speed Multi (HM) head: 0201 to 45*45 mm, with L100 mm and H15 mm or under.
- Flexible Multi (FM) head: 03015 to 55*55 mm, with L100 mm and H28 mm or under.
- The two windows are not interchangeable. The 0201 figure and the 45 mm figure belong to the HM row; 03015 and 55 mm belong to the FM row. Neither row is extended to cover the other.
- A footnote on the page adds that component height of 6.5 mm or higher, or sizes of 12 mm or more in length or width, requires the optional multi-camera.
- The page also carries a line asking buyers to contact the supplier about mounting 0201 components — kept as printed.
Accuracy As Printed
- The mounting-accuracy row is qualified the same way as the speed row: under optimum conditions as defined by Yamaha Motor, with standard evaluation materials in use.
- Its printed value is ±0.035 mm (±0.025 mm) Cpk?1.0 (3?). The string is reproduced exactly as it appears on the page.
- The symbols between the numbers are printed in a form that does not explain itself. They are neither corrected nor interpreted in this text; the maker is asked to confirm what they stand for.
| Model | YSM20R | |
| Applicable PCB dimensions | Dual stage | Single PCB: L810*W490 mm to L50*W50 mm |
| (For X-axis 2-beam option only) | Double PCB: L380*W490 mm to L50*W50 mm | |
| Single lane | L810*W490 mm to L50*W50 mm | |
| Mounting capability | X-axis 2-beam: 95,000 CPH (under optimum conditions as defined by Yamaha Motor) when 2 High-Speed Multi (HM) Heads are used | |
| Applicable components | High-Speed Multi (HM) Head* | 0201 to 45*45 mm |
| L100 mm, H15 mm or under | ||
| Flexible Multi (FM) Head | 03015 to 55*55 mm | |
| L100 mm, H28 mm or under | ||
| *Component height of 6.5 mm or higher or component sizes of 12 mm in length/width or greater requires optional multi-camera. | ||
| Please contact us for info regarding mounting 0201 components. | ||
| Mounting accuracy | Under optimum conditions as defined by Yamaha Motor | |
| (when standard evaluation materials are used): | ||
| ±0.035 mm (±0.025 mm) Cpk?1.0 (3?) | ||
| Number of component types | Fixed plate | 140 types max. |
| (8 mm wide tape feeder equivalent) | ||
| Feeder carriage | 128 types max. | |
| (8 mm wide tape feeder equivalent) | ||
| Tray | 10 types: Carriage type (maximum, when fitted with cATS10) | |
| 30 types: Fixed type (maximum, when fitted with sATS30) | ||
| Power supply | 3-phase AC 200/208/220/240/380/400/416V ±10% 50/60Hz | |
| Air supply | Clean dry air of 0.45 MPa or more | |
| Exterior dimensions (excluding protrusions) | L 1,374*W 1,857*H 1,445 mm | |
| Weight | 2,050 kg | |
Component Positions And Feeders
- Fixed plate: 140 types maximum, on an 8 mm wide tape feeder equivalent.
- Feeder carriage: 128 types maximum, on the same 8 mm wide tape feeder equivalent.
- Tray: 10 types as a carriage type (maximum when fitted with cATS10), or 30 types as a fixed type (maximum when fitted with sATS30).
- The attribute field states 140. That figure belongs to the fixed-plate row; 128, 10 and 30 describe other holding methods and are not folded into it.
- Feeders themselves are supplied separately from this machine. Tell us the mix you run and the position count is matched against it.
Site Services And Footprint
- Power supply: 3-phase AC 200/208/220/240/380/400/416V ±10%, 50/60Hz.
- Air: clean dry air of 0.45 MPa or more. The attribute field states 0.45MPa; the two wordings are both left as printed rather than reconciled here.
- Exterior dimensions, excluding protrusions: L 1,374*W 1,857*H 1,445 mm. Weight: 2,050 kg.
- Plan the floor, the power drop and the air line from these figures; nothing is added to them on this page.
What To Verify Before Buying
- State and cover: neither has a field on this page, so no machine condition and no after-sales term is put forward here.
- Packing and carriage: the package field reads wooden box. No delivery option and no port appear in the attributes.
- The quality field reads 100% Tested. That is a testing statement as printed, and it is treated as nothing more — it is not stretched into an origin claim or a maker's guarantee.
- Above the listing sit three heading tags — a gas figure, the model name and the position count. They are platform keyword tags rather than body text; tidying them belongs to the backend.
Behind The Machines We Supply
Choosing a placement machine comes down to the component window you need covered and the way lanes and positions are arranged around it. Two decades in the SMT machine trade stand behind WEN ZHAN Technology, so the head, lane and feeder questions are answered from the manufacturer's own documentation: send us the components and the volume, and the arrangement, the particulars of that unit and the paperwork are laid out for you ahead of any commitment.
Questions On This Machine
Q1: What does this page describe?
A: A Yamaha YSM20R placement machine for PCB assembly lines, with the attributes above and the maker's specification table below them.
Q2: What speed figure is published?
A: One figure: 95,000 CPH printed for the X-axis 2-beam setting with two High-Speed Multi heads, under optimum conditions as defined by Yamaha Motor.
Q3: Can I plan output from that number?
A: Only with its qualification carried alongside it. The optimum is the maker's definition and your product decides the practical rate, so the figure is not repeated here as a bare rate.
Q4: Which components can it place?
A: HM head: 0201 to 45*45 mm, L100 mm and H15 mm or under. FM head: 03015 to 55*55 mm, L100 mm and H28 mm or under.
Q5: What accuracy is stated?
A: ±0.035 mm (±0.025 mm) Cpk?1.0 (3?), under the same optimum-conditions qualification. The symbols are quoted as they stand and their meaning is confirmed with the maker.
Q6: How many component positions are there?
A: 140 types maximum on a fixed plate, 128 types maximum on a feeder carriage, and 10 or 30 tray types depending on the tray fitting.
Q7: What services does the machine need?
A: 3-phase AC 200/208/220/240/380/400/416V ±10% at 50/60Hz, and clean dry air of 0.45 MPa or more.
Q8: How large is it, and how heavy?
A: L 1,374*W 1,857*H 1,445 mm excluding protrusions, at 2,050 kg.
Q9: What about state, cover and delivery?
A: None of the three has a field on this page. Ask, and the position on each is set out for the machine you are offered.
Speaking With The Team
- Company: WEN ZHAN Technology
- Tel / WhatsApp: +86 18823383970
- E-mail: wenzhanhucai@163.com
Send the components you place, the lane arrangement you need and the volume you work to — the head and feeder configuration is checked against them, and the printed figures are confirmed before anything is quoted.
