| Quantity: | |
|---|---|
FUJI NXT I M3 SMT Pick and Place Machine
Product Overview
Placement work on a Fuji platform begins with the head, and this listing prints a figure for each one. Offered here under the brand FUJI and the model NXT I M3, with the specification field reading SMT pick and place machine, the unit comes with a short attribute set: a patch speed against each of four head types, the air requirement, the electrical supply, a warranty field of one year, three courier options and wooden case packing. No field on the page describes the state of the machine, so none is claimed here — that question is answered when you ask it. Tell us the boards you run and the output you need, and the configuration open to you is confirmed.
Patch Speed as Listed, Head by Head
- H12HS — 22,500
- H08 — 10,500
- H04 — 6,500
- H01 — 4,200
Each figure is tied to the head type printed beside it. The page states no single machine-level output, and none is worked out here; neither does it say which component sizes a given head type handles. Ask about your own mix and the answer is obtained for you.
Key Features
1. Brand and Model Fields — the listing carries FUJI as brand and NXT I M3 as model.
2. Specification Field — SMT pick and place machine, exactly as printed.
3. Patch Speed Per Head Type — four separate figures, each paired with its head name on the page.
4. Air Requirement — 0.5MPa (5kgf/cm2), with the flow figure printed alongside it.
5. Electrical Supply — 3P / 200V / 10KVA as stated in the attributes.
6. Warranty Field — the listing carries one year.
7. Delivery Options — FedEx, UPS, DHL, or as required.
8. Wooden Case Packing — the package field as printed.
Technical Specifications
Name: FUJI NXT I M3
Brand: FUJI
Model: NXT I M3
Specification: SMT pick and place machine
Patch speed: H12HS 22,500 / H08 10,500 / H04 6,500 / H01 4,200
Air flow: 0.5MPa (5kgf/cm2), 10NI/min.
Using electric: 3P / 200V / 10KVA
Warranty: 1 year
Delivery: FedEx, UPS, DHL or as required
Package: Wooden case
Notes Before Ordering
- Feeder configuration, component range, vision arrangement, board size, machine footprint and weight are not among the attributes. Nothing is filled in for them on this page — put your requirement in the message and the figures come from the machine data.
- The flow figure is printed as 10NI/min. and is reproduced in that form. If the unit matters to your air supply planning, ask us to confirm it before you design around it.
- No field here states what state the machine is in, so nothing is claimed about it. Ask, and the actual unit is described before anything is agreed.
| Name: | FUJI NXT I M3 / NXT I M3S / NXT I M6 / NXT I M6S |
|---|---|
| Brand: | FUJI |
| Model: | FUJI NXT I M3 / NXT I M3S / NXT I M6 / NXT I M6S |
| Specification: | SMT PICK AND PLACE MACHINE |
| Condition: | original |
| Quality: | top qualiy |
| Stock: | large |
| Payment: | T/T before shipment |
| Shipment: | on-time shipment |
| Warranty: | 1 year |
| Delivery: | fedex,ups,dhl,as required |
| Package: | wooden case |
Why Choose WEN ZHAN Technology
A head-rated machine has to be matched to the job it will actually do. WEN ZHAN Technology has fitted out SMT lines for more than twenty years, which is why the figures above are set out head by head rather than as one headline number: describe the boards you place and the output you need, and the unit is checked against your requirement, shown to you in detail, and quoted with the delivery terms you ask for.
FAQ
Q1: Which Fuji machine appears on this page?
A: The brand reads FUJI, the model NXT I M3, and the specification field says SMT pick and place machine.
Q2: How is the placement speed presented?
A: As four separate figures, one against each head type, exactly as the attributes carry them.
Q3: What are the four figures?
A: H12HS 22,500; H08 10,500; H04 6,500; H01 4,200.
Q4: What is the overall output of the machine as a whole?
A: No machine-level figure is published, and none is calculated from the head figures here. Give us your target and we will confirm the configuration that reaches it.
Q5: Which component sizes does a given head type handle?
A: The page does not say. Give us the components you place, and the answer is obtained for you.
Q6: What must the workshop provide?
A: Electrical supply is given as 3P / 200V / 10KVA, and the air requirement as 0.5MPa (5kgf/cm2) with the flow printed as 10NI/min.
Q7: Does a warranty come with it?
A: The listing carries a warranty field of one year; the terms attached to that figure are confirmed with your order.
Q8: How is the machine sent and packed?
A: Delivery is listed as FedEx, UPS, DHL or as required, and packing as a wooden case.
Q9: What state is the unit in?
A: No field on this page states it, so no claim is made here. Ask, and we will describe the actual machine.
Contact
- Company: WEN ZHAN Technology
- Tel / WhatsApp: +86 18823383970
- E-mail: wenzhanhucai@163.com
Send the boards you run and the output you need. We will confirm the configuration open to you, share the unit's details and quote with the delivery terms you ask for.
