| Quantity: | |
|---|---|
Samsung CP40 N045 to N1100 SMT Nozzle Series
About This Samsung CP40 N Series SMT Nozzle Set
These are the N-series tips for a Samsung CP40 placement head, listed under seven designations: N045, N080, N1407, N240, N400, N7500 and N1100. The series is gathered on this number so a line can be brought back to strength in a single order instead of seven.
A tip is the last part of the machine to touch the board before a component is left behind. It picks by vacuum, carries the part across, and releases it on the pad. That whole sequence rests on the tip being the right size for the component and on its face staying clean and true.
Key Specifications & Samsung CP40 Nozzle Model Matrix
Specifications
| Item | Value |
| --- | --- |
| Name | SMT NOZZLE |
| Brand | Samsung |
| Type | SMT Machine Parts |
| Condition | Original |
| Quality | 100% Tested |
| Warranty | 3 Month |
| Package | Carton Box With Foam Protect |
| Delivery | Ups,dhl,fedex,as Required |
Model list
| Model |
| --- |
| N045 |
| N080 |
| N1407 |
| N240 |
| N400 |
| N7500 |
| N1100 |
Which of the seven a position takes follows the component it places; a small chip and a large connector do not share a tip. Send the machine model, the position and the component, and the designation is matched against those three.
Component Range, Tip Sizing & CP40 Placement Head Mechanics
The head carries several tips and brings them down in turn. Every pick is a short event - vacuum on, part lifted, move, set down, vacuum off - repeated for as long as the line runs. A tip that is a size off does not stop that sequence. It makes the component harder to hold, so the failure arrives as an occasional miss rather than as a breakdown.
Two things wear. The face dulls and collects paste, which weakens the seal; the bore loads, which slows the vacuum down. Both show up first on the smallest components, because those have the least area to seal against.
Nozzle Inspection Standards, Packaging & 3-Month Warranty
Each tip is tested before dispatch. Worth a second look on arrival: the tip face for dried flux, the bore for a partial clog, and the marking on the body against the slot it belongs in. A tray of loose tips is how the wrong one ends up in a head.
Packing is a carton with foam around the tips. Couriers used are UPS, DHL and FedEx, whichever fits the order.
Three months is the period carried for this part.
Frequently Asked Questions On The CP40 N045-N1100 Nozzles
Q1: Which machine do these tips fit?
A: Samsung CP40 heads. The series spans seven designations, N045 through N1100.
Q2: Do the seven arrive as a set?
A: They are separate tips, one designation each, chosen for the position they serve.
Q3: How do I know which one I need?
A: From the component and the position it is placed in. Send both and the designation is matched.
Q4: What is checked before dispatch?
A: Each tip is tested, and the face, the bore and the marking are worth a second look on arrival.
Q5: How long is the cover?
A: Three months on this number.
Q6: How does it travel?
A: In a carton with foam, by UPS, DHL or FedEx.
