Views: 0 Author: Site Editor Publish Time: 2026-11-17 Origin: Site
Short answer: The Samsung SM 24 mm feeder is the 24 mm-width member of the Samsung SM feeder family — an electric tape feeder used on Samsung SM, CP and SME placement machines. It is no longer offered on its own product page: the standalone 24 mm listing has been taken down, and the 24 mm version is now ordered from the combined 8–72 mm feeder listing, which carries 8, 12, 16, 24, 32, 44, 56 and 72 mm widths in one place. Compatibility covers CP40 through CP45NEO, SM310 through SM482, and the SME machines, with a 1-year warranty and shipment from Shenzhen.
Tape width is not a preference — it is set by the carrier the component arrives on. Buyers step up from 8, 12 and 16 mm to 24 mm when the part no longer fits a narrower carrier, which is typically the larger ICs, connectors and modules that sit alongside the small chip components on the same panel.
That is why a 24 mm feeder is usually bought alongside narrower widths rather than on its own, and why the current listing groups the whole width set: one part number family, one compatibility table, and the 24 mm version specified as a width instead of a separate product.
Samsung feeder designations on the CP and SM side also include double-width variants — 8X2 and 8X4 — which the compatibility table below lists next to the standard widths.
Machine family | Widths listed | Machine models |
|---|---|---|
CP | 8, 8X2, 8X4, 12, 16, 24, 32, 44, 56, 72 mm | CP40, CP45, CP45FV, CP45NEO, NEO |
SM | 8, 8X2, 8X4, 12, 16, 24, 32, 44, 56, 72 mm | SM310, SM320, SM321, SM421, SM411, SM471, SM481, SM482 |
SME | 8, 12, 16, 24, 32, 44, 56, 72 mm | SM421, SM411, SM471, SM481, SM482 |
SM feeder | 8, 12, 16, 24, 32, 44, 56, 72 mm | SM421, SM411, SM471, SM481, SM482 |
Read the table from the machine backwards if you already know your line: an SM481 or SM482 takes 24 mm on both the SM and SM feeder rows, while an SME build lists 24 mm from 8 to 72 mm without the 8X2 and 8X4 variants.
If the part you are trying to run sits on a 24 mm carrier, the question is not "which feeder" but "which of my machines accepts a 24 mm feeder". Work it in three steps: confirm the carrier is 24 mm, check the machine model against the table above, then confirm the condition and packing you need. The reverse direction matters too — a feeder bought for an SM482 will fit the same 24 mm width on an SM471, because both appear on the same rows.
The listing covers 8, 12, 16, 24, 32, 44, 56 and 72 mm, plus the 8X2 and 8X4 double-width variants on the CP and SM rows. In practice that means one supplier can cover a full feeder trolley rather than a single width.
Three checks decide the order:
Carrier width. Match the tape, not the component footprint — the feeder indexes the carrier.
Machine family. CP and SM accept the full set including 8X2 and 8X4; SME and SM feeder rows run 8 to 72 mm.
Mix, not just maximum. A line that runs mostly 8 and 12 mm tape still needs one or two 24 mm feeders for the larger parts; count the positions, not the part types.
Feeders are consumable in the sense that they wear and multiply as a line grows, so the width that gets ordered repeatedly is usually the one worth keeping stock of. The page records stock as large, and the same supplier carries SMT feeders across other brands if your line is mixed.
Condition is the field to slow down on, because the listing states it in more than one way.
The attribute area reads "New, New/used" — both states in one line.
The Quick Details block reads "original new/used and copy new" — which separates original from copy as well as new from used.
The earlier standalone 24 mm page, now withdrawn, recorded condition as "NEW" and quality as "100% Tested".
Those are not the same statement, and none of them can be resolved by reading further. Before ordering, put the answer in writing: is the unit new or used, and is it original or copy? The 24 mm width exists in all of those states, and the quotation should name the one you are buying.
On quality, the listing uses the phrase "Top Quality" — a seller's description, not a standard, a grade or a certificate. The withdrawn page's "100% Tested" is likewise a listing phrase, not a test report. Neither should be read as a certification, and this article makes no claim about test data.
A tape feeder is the interface between the component reel and the placement head: it holds the carrier, indexes it to the pick position, and lets the head take the part. Width has to match the carrier, and the feeder has to match the machine's feeder platform — which is why the compatibility table above is the first thing to check and the last thing to re-check.
Because feeders sit inside a running line, they are usually bought as part of a wider order: the placement machines, the SMT line around them, and the consumables that keep them running. The supplier lists SMT equipment and SMT parts together, which is useful when a feeder order and a spares order would otherwise go to two suppliers.
The listing gives packing in two places, and they differ: the attribute area says Wooden Case, while the Quick Details block says carton box with foam protect. Both are export packing; which one applies to your order is a question for the quotation, and for multiple feeders the answer affects how the shipment is consolidated.
The remaining terms are stated plainly: port Shenzhen, delivery by UPS, DHL or FedEx as your order requires, payment T/T before shipment, shipment described as on-time, stock large, and a 1-year warranty. No price is published on the listing, and none should be inferred from it.
Is there a separate product page for the 24 mm feeder? No. The standalone 24 mm page has been withdrawn, and the 24 mm version is now ordered from the 8–72 mm Samsung SM feeder listing, which is the page linked at the end of this article.
Which Samsung machines take a 24 mm SM feeder? CP40, CP45, CP45FV, CP45NEO and NEO on the CP side; SM310, SM320, SM321, SM421, SM411, SM471, SM481 and SM482 on the SM side; and SM421, SM411, SM471, SM481 and SM482 on the SME and SM feeder rows.
Is the feeder new, used, original or copy? The listing carries "New, New/used" in one field and "original new/used and copy new" in another. State which combination you need and have it confirmed on the quotation.
How is it packed? The listing says Wooden Case in one field and carton box with foam protect in another. Confirm the packing for your order, especially for multi-feeder shipments.
What are the commercial terms? Port Shenzhen, T/T before shipment, delivery by UPS, DHL or FedEx as your order requires, and a 1-year warranty. No price is published.
Can I order other widths at the same time? Yes — 8, 12, 16, 24, 32, 44, 56 and 72 mm, plus 8X2 and 8X4 on the CP and SM rows.
Tell us the machine model, the tape width you need and whether you want new or used, original or copy, and the 24 mm feeder is quoted from the current 8–72 mm Samsung SM feeder range — Samsung SM feeder 8–72 mm.
Contact: Tel/WhatsApp +8618823383970 · Email wenzhanhucai@163.com Follow: Facebook https://www.facebook.com/smtwenzhan/ · YouTube https://youtube.com/@wenzhan-p1d · Instagram https://www.instagram.com/vivian_tdx/
Samsung SM 24mm Tape Feeder: Compatibility, Width Selection and Buying Guide
Magazine PCB Loader Unloader HY-250LD: Four-Model SMT Line Feeding Guide
How Should Feeder Positions Be Planned for Mixed Components?
FUJI XP142E Pick and Place Machine: SMT Chip Mounter Specifications and Buyer Guide
JT-MFO Reflow Oven: 8+8 Zone SMT Reflow Soldering Machine for PCB Assembly
How Do You Program an Automated Wave Soldering Machine for a New Board?
Siemens Siplace SX2 Pick and Place Machine (ASM SX2): Modular Chip Mounter Guide